Denon AVR-3806 Bedienungsanleitung Seite 53

Advanced Operation
1. DVD player (DVD), DVD recorder (DVDR) system
buttons
SRC ON : Power on
SRC OFF : Power off
, : Manual search (forward and reverse)
6 7
: Stop
2
: Play
1
, : Auto search (to beginning of track)
8 9
: Pause
3
SETUP : Setup
MENU : Menu
c, d, b, a : Cursor up, down, left and right
ENTER : Enter
DISP : Display
CH +, – : Switch channels +, –
0 ~ 9, +10 : Number
Default setting = DVD
The preset codes of a DVDR can be recorded in the DVD mode
so that the DVD recorder can be operated (
It is only possible to set the preset memory for either the
DVD or DVDR.
2. Satellite (SAT) tuner, cable (CABLE) system buttons
SRC ON : Power on
SRC OFF : Power off
SETUP : Setup
DISP : Guide
MENU : Menu
c, d, b, a : Cursor up, down, left and right
ENTER : Enter
CH +, – : Switch channels +, –
0 ~ 9, +10 : Number
When there are codes usable for the preset device, those
codes are sent when the buttons below are pressed. If not,
by default the DVD codes are punched through. If the punch
through setting is made after the preset memory is set, the
codes are sent with priority.
page 47).
48
ENGLISH
Advanced Operation
, : Manual search (forward and reverse)
6 7
: Stop
2
: Play
1
8 , 9 : Auto search (cue)
3 : Pause
Default setting = SAT
The preset codes of a CABLE can be recorded in the SAT/CBL
mode so that the cable device can be operated (
It is only possible to set the preset memory for either the
SAT or CBL.
ENGLISH
page 47).