Playing Audio Sources (Cds And Dvds) 2-Channel Playback Modes - Denon AVR-3806 Bedienungsanleitung

Basic Operation
PURE DIRECT DIRECT/STEREO
PURE DIRECT
DIRECT/STEREO
Playing audio sources (CDs and DVDs)
2-channel playback modes
• The AVR-3806 is equipped with three 2-channel playback
modes exclusively for music.
• Select the mode to suit your tastes.
2 PURE DIRECT mode
This mode reproduces the sound with extremely high quality.
When this mode is set, all circuits and processes not required for
the selected input source (FL tube, video circuit and tone control,
as well as digital circuitry and other unnecessary circuits for
analog audio inputs) are automatically turned off so the music
signals can be reproduced with high sound quality.
PURE DIRECT
Press the button to select the PURE
DIRECT mode.
2 DIRECT mode
Use this mode to achieve good quality 2-channel sound. In this
mode, the audio signals bypass such circuits as the tone circuit
and are transmitted directly, resulting in good quality sound.
DIRECT/STEREO
Press the button to select the
DIRECT mode.
The mode switches as shown below each time the
DIRECT/STEREO button is pressed.
DIRECT STEREO
30
ENGLISH
2 STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
DIRECT/STEREO
Press the button to select the
STEREO mode.
• The system setup function cannot be used when the PURE
DIRECT mode is set. To use the system setup function, cancel
the PURE DIRECT mode.
• If the HDMI input terminal is selected, video outputs are
outputted in the PURE DIRECT mode.
• The channel level and surround parameters in the PURE
DIRECT mode are the same as in the DIRECT mode.
ENGLISH
Basic Operation