Dts Neo:6 Mode; Memory And Call-Out Functions (User Mode Function); User Mode - Denon AVR-3806 Bedienungsanleitung

Basic Operation

DTS NEO:6 mode

Surround playback can be performed for the analog input and
digital input 2-channel signals.
1
STANDARD
Press the button to select "DTS
NEO:6" mode.
The mode switches as shown below each time the
STANDARD button is pressed.
II
DOLBY PL x DTS NEO:6
2
Play a program source.
3
SURROUND PARAMETER
Press the
• The surround parameter menu is displayed.
4
CURSOR F F G G
Press the or button to select the
play mode.
5
CURSOR D D
Press the
various surround parameters.
6
CURSOR F F
Press the
parameters setting.
7
ENTER
Press the
button to complete the setting.
• When "Default" is selected and the CURSOR F F button is
pressed, "MODE" and "TONE" are automatically reset to the
default values and "CINEMA EQ." is set to "OFF".
• When playing PCM digital signals or analog signals in the
button.
II
DOLBY PRO LOGIC
modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal,
the mode automatically switches to DTS surround.
2 Surround parameters e
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
or H H button to select the
or G G button to adjust the
SURROUND PARAMETER
or
II
, DOLBY PRO LOGIC x, DTS NEO:6
36
ENGLISH
Memory and call-out functions (USER MODE
function)
• The AVR-3806 is equipped with a function for storing the
selected input source, the auto surround mode and input mode
in the memory and selecting these settings when you want to
use them.
• Three patterns of settings can be stored in the memory
pressing the USER MODE buttons.
2 Storing the settings in the memory
1 The following are stored in the memory:
q q Currently set input source
w w Currently set auto surround mode
e e Currently set input mode
2

USER MODE

Press and hold the
least three seconds which you want to store the
settings.
In this case, press the button and hold it in until the indicator
of the selected USER MODE button lights.
2 Calling the settings out
USER MODE
Press the button at which the settings
you want to call out are stored.
• The indicator for the selected USER MODE button lights.
In this case, press the button and hold it in until the indicator
of the selected USER MODE button lights.
ENGLISH
Basic Operation
button for at