Herunterladen Inhalt Inhalt Diese Seite drucken

Blow Function; Cleaning/Maintenance; Cleaning & Maintenance; Storage - Parkside PNTS 1400 B1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PNTS 1400 B1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Blow Function

Operation without the use of a filter
is recommended.
Connect the suction hose (21) to the
connecting blower (17) on the motor
head (3).

Cleaning/Maintenance

Pull out the mains plug.
Danger of electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
Cleaning.the.Equipment:
Never.hose.the.appliance.
down.with.water..Never.use.
aggressive.cleaning.agents.or.
solvents..This.could.damage.
the.appliance..
After use, empty the stainless steel con-
tainer (
9):
-
Opening the drain plug to allow the
vacuumed liquid to drain out (
10). A liquid residue remains in the
container.
To remove all residual liquids, fold
down the bow handle (1) and
take off the motor head (
the bow handle with the locking
levers (16), hold the stainless steel
container (9) with one hand on the
bow handle and the other on the
bottom of the container and pour
out the residual liquid.
Clean the waste tank with a damp
cloth.
Wash the foam filter (
warm water and soap, and allow to
dry.
Beat the dust out of the fluted filter
(
or hand brush.
Replace the paper filter bag (
when full (see "replacement parts" for
reordering)

Storage

1.
2.
3.
4.
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines must not be disposed of
3): fix
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
25) and clean it with a paint brush
Release both locking levers
(
16)
the bow handle (1).
Wind the power cable (5)
around the power cable holder
(4).
The attachment ports (15/18)
serve to store the telescopic
suction hose (19), suction hose
(21) and nozzles (27/28).
Store the appliance in a dry
place and out of reach of chil-
dren.
GB
IE
23) with luke-
) with luke-
26)
and fold down
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 74286

Inhaltsverzeichnis