VOLTCRAFT V-CHARGE 100 DUO Bedienungsanleitung Seite 103

Charging end voltage per cell
TVC=YOUR RISK!
Here, the voltage per cell at which discharging ends in lithium rechargeable batteries can be set.
Attention!
Never set the voltage too high. This can result in a fire or explosion with lithium re-
chargeable batteries!
Observe the table in chapter 7 and any special information of the rechargeable battery
manufacturer.
Deactivation at overtemperature
TEMPERATURE
CUT-OFF
The charger can automatically cancel charging/discharging if the rechargeable battery exceeds
the temperature set here.
To use this function, an external temperature sensor is required (not enclosed). It must
be connected to the respective socket of the charger.
Maintenance charging current (for NiMH and NiCd only)
TRICKLE
Set the maintenance charging current here. When a NiMH or NiCd rechargeable battery is fully
charged, it will lose part of its capacity again by self-discharge.
The maintenance charging current (short charging impulses, no continuous charging current!)
ensures that the rechargeable battery remains fully charged. Thus also prevents crystal forma-
tion in the rechargeable battery.
4.20V
50C
100mA
103