Technical Data; Noise And Vibration Information - Hilti DC 125-S Bedienungsanleitung

Diamond cutter DC125-S
1 Ventilation slots
2 On/off switch
3 Side handle
4 Spindle lockbutton
5 Disc guard release button
6 Grinding disc spindle

Technical data

Nominal voltage:
Nominal current input:
Power input
Power output
Frequency:
No-load speed
Cutting disc dia.
Drive spindle thread
Starting current regulator
Constant-speed electronics
Weight approx.
Protection class

Noise and vibration information

(Values determined in accordance with EN 50144)
Typical noise levels (A-weighted)
Machine:
Noise level (pressure):
Noise level (power):
Ear protectors must be worn!
Typical rated vibrational acceleration:5.0 m/s
EG declaration of conformity
Description :
Designation:
We declare, under our sole responsibility, that this product complies with the following
standards or standardization: HD 400, EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3 according to the provisions of the directives 89/336/EWG, 98/37/EG
Hilti Corporation
Dr. Ivo Celi
Senior Vice President
Business Unit Diamond
01/2005
Ear protection must Safety gloves must
be worn be worn
Printed: 07.07.2013 | Doc-Nr: PUB / 5069468 / 000 / 00
7 Disc guard
8 Clamping flange with O-ring
9 Grinding/cutting disc
10 Clamping nut
11 Kwik-Lock clamping nut
12 Pin wrench
230 V / 240 V
6,7 A / 6,4 A
1400 W
820 W
50 Hz
11 000 r.p.m.
max 125 mm
M14
●
●
1.8 kg
(without accessories)
II, Z
DC125-S
88 dB (A)
101 dB (A)
Diamond cutter Serial no.:
DC125-S Year of design:
Eye protection
must be worn
110 V
12.2 A
1200 W
610 W
50 Hz
11 500 r.p.m.
max 125 mm
M14
●
●
1.8 kg
II, Z
(double insulated)
2
xx/0000001-xx/9999999
1999
Dr. Heinz-Joachim Schneider
Executive Vice President
Business Area Electric Tools & Accessories
01/2005
Respiratory equip- Safety overalls
ment must be worn must be worn
(double insulated)
Read the operating
instructions
15