Sharp XG-PH50X Serviceanleitung Seite 38

XG-PH50X
XG-PH50X-NL
How to enter Service Mode
Select the group"Option2"by user menu and then select "service Mode".
Enter the password "9303"
How to adjust in service mode
- Select the group to adjust with the DOWN key or the UP key,
and enter the adjustment item with the ENTER key on the remote control or key pad.
- Select the adjustment item with the DOWN key or the UP key.
- Use the LEFT key or the RIGHT key for adjustment.
- To return from the adjustment item to the adjustment group, use the UNDO key or the MENU key.
note
- In service mode, user adjustment value will be changed to default value (Picture/CMS).
When you exit from service mode, adjustment value will change to user adjustment value.
- In service mode, the following functions will be canceled.
AV mute / sound mute / freeze / enlarge / PinP
- "standby" button on a remote controller and a operation pad is invalid in the service mode.
If you would like to turn off the power, please exit from service mode.
adjustment of white balance
1. Feed a RGB PC signal to input1
Adjustment of RGB PC
2. Select the group "DLP"
white balance
adjustment of video
1. Feed a video signal
white balance
2. Select the group "DLPV"
1. Feed a component signal to input1
adjustment of DTV
white balance 2. Select the group "DLPV"
adjustment of video
1. Feed a video signal
2. Select the group "VIDEO"
adjustment of VIDEO
picture
adjustment of VIDEO
color
setting of VIDEO gain control
adjustment of delay
between chroma and luminance
adjustment of VIDEO
horizontal position
adjustment of VIDEO
low pass filter
PH50X will change to input1/RGB mode automatically
group Subject
DLP R1-BLK
R1-GAIN
G1-BLK
G1-GAIN
B1-BLK
B1-GAIN
PH50X will change to input4 mode automatically
group Subject
DLPV V-R1-BLK
V-R1-GAIN
V-G1-BLK
V-G1-GAIN
V-B1-BLK
V-B1-GAIN
PH50X will change to input1/component mode automatically
group Subject
DLPV C-R1-GAIN
C-G1-GAIN
C-B1-GAIN
(memo) The adjustment value of the brightness is common to video.
PH50X will change to input4 mode automatically
group Subject
VIDEO PICTURE
BRIGHT
TINT
N-COLOR
AGC-CNT
DLY
H-CENTER
FILTER
effective
initial value adjustment
range
±20
0 brightness of red
±20
0 contrast of red
±20
0 brightness of green
±20
0 contrast of green
±20
0 brightness of blue
±20
0 contrast of blue
effective
initial value adjustment
range
±20
0 brightness of red
±20
0 contrast of red
±20
0 brightness of green
±20
0 contrast of green
±20
0 brightness of blue
±20
0 contrast of blue
effective
initial value adjustment
range
±20
0 contrast of red
±20
0 contrast of green
±20
0 contrast of blue
effective
initial value adjustment
range
±60
0 contrast
±60
0 brightness
±120
0 tint(effected in NTSC only)
±120
0 color saturation
0 0-1 auto gain control
0 : AGC On
1 : AGC Off
±5
0
±10
0
±3
0 filter gain
38
source/mode
INPUT1 / RGB
INPUT1 / RGB
INPUT1 / RGB
INPUT1 / RGB
INPUT1 / RGB
INPUT1 / RGB
source/mode
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
source/mode
INPUT1 / component
INPUT1 / component
INPUT1 / component
source/mode
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video
INPUT4 / video