Sharp XG-PH50X Serviceanleitung Seite 30

XG-PH50X
XG-PH50X-NL
15. Removing the Power Unit and Audio Unit
15-1. Remove the four screws from the power unit.
15-2. Detach the power air guide from the power channel upper.
15-3. Remove the four screws from the power channel down and then disconnect the two power connector PR.
15-4. Remove the four screws from the power unit and then take out the power unit.
15-5. Remove the four screws from the holders and then disconnect the signal connectors SG.
15-6 Remove the four screws from the audio unit and then take out the audio unit.
Power Air Guide
Power Channel upper
SG
15-2
Ballast Unit
Holder
15-5
Power Channel Down
15-3
Chassis
15-1
Holder
15-4
Power Unit
Power Unit Insulator
30
Power Unit
Audio Unit
15-6