Using The Remote Control; Handling The Remote Control; Basic Operation; Turning The Power On/To Standby Mode - Yamaha ysp-1 Bedienungsanleitung

Using the remote control

The remote control transmits a directional infrared beam.
Use the remote control within 6 m of this unit and point it
toward the remote control sensor on the main unit during
operation.

Handling the remote control

• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– places of high humidity, such as near a bath
– high temperatures, such as near a heater or stove
– extremely low temperatures
– dusty places
• Do not expose the remote control sensor on the main
unit to direct sunlight or lighting (inverted fluorescent
lamps).
• If the batteries grow old, the effective operation
distance of the remote control decreases considerably.
If this happens, replace the batteries with two new ones
as soon as possible.

BASIC OPERATION

Approximately
6 m
30˚ 30˚
Turning the power on/to standby
mode
INPUT VOLUME STANDBY/ON
+ +
STANDBY/ON
1 2
5 6
Press STANDBY/ON on the front panel or the
remote control to turn this unit's power on/to
standby mode.
This unit's power switches between on and standby mode
each time STANDBY/ON is pressed.
STANDBY/ON
Front panel
BASIC OPERATION
or
POWER
AV
3 4
7 8
or
Remote control
19