Connecting Other External Components - Yamaha HTY-7030 Bedienungsanleitung

Connecting other external components

If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not
support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component
(e.g., VCR) to the AUX 1 AUDIO INPUT jacks on this unit.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 20).
Note
If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at
the AUX 1 OPTICAL DIGITAL INPUT or AUX 2 COAXIAL DIGITAL INPUT jack take priority over the analog audio signals input
at the AUX 1 AUDIO INPUT jacks.
ANTENNA
DOCK
Video signal to the TV
Audio
Audio pin cable
Optical cable
Digital audio pin cable
AUDIO INPUT OUT
VIDEO
AUX 1 TV/STB SUBWOOFER
R L
Analog
audio
output
DVD player/recorder, VCR,
game console, CD player, etc.
(U.S.A. and Canada models)
DIGITAL INPUT
AUX 2 DVD
COAXIAL
OPTICAL
AUX 1 TV/STB
Optical Coaxial
digital digital
output output
Connections
Rear panel of this unit
XM IR IN
27
En