Dräger X-am 7000 Technisches Handbuch Seite 72

The Menu » Settings «
CAUTION
!
To avoid incorrect measurements when the application mode
is activated, users of the instrument must be informed about
the contents of the individual settings!
The desired application can be selected via the Quick menu:
Briefly press the » « key to open the » Quick menu «.

M
Use the » « key to select the line » Application Mode « and press
M
the » « key.
OK
Use the » « and » « keys to select the desired application
M
(customer-specific name) and press the »
setting.
The desired application has been selected and the instrument uses the
desired configuration for operation. The user can select a different
application at any time using the procedure described above.
The selected application is displayed on the bottom line of the display.
In addition, the » « symbol is shown on the right of the display.
The application mode can only be deactivated via theDräger CC Vision
software.
72
« key to confirm the
OK
Dräger X-am 7000