Miller Revolution Handbuch Seite 2

MILLER REVOLUTION (GB)
Thank you for purchasing the Miller Revolution Harness. The Revolution is an all
new and totally innovative harness engineered with eight unique components and
more than eleven key product features. Your Miller Revolution harness was
engineered to meet or exceed all applicable CE requirements and standards.
Please carefully read the new Miller Harness Instruction manual to help you
identify all of the various general warnings, inspection procedures and other
helpful information.
Please carefully read this supplementary Revolution Instruction manual. It
contains special instructions, inspections and maintenance procedures that are
unique to the Revolution Harness product line. Should you have any questions
about your Miller Revolution Harness, please contact the Miller Customer Service
at: +44 (0)1256 693200
Preparing your harness for use:
• Before you don (wear) the harness, you must read and understand the
Miller Harness Instruction manual.
• Although your harness is « ready-to-use », sizing it the first time will
require some adjustments to ensure a proper, snug fit. By taking the time
to adjust the harness correctly the first time, you will eliminate the need
for future readjustments.
A. Miller Revolution Key Features
A.1
A.3
2
A.2
A.4 A.5
REVOLUTION KEY FEATURES
A.6
TM
A.1 PivotLink Connection
The PivotLink connection allows you a greater freedom of movement while
wearing your harness than was previously available. By pivoting at the hip or at
the waist, there's no pulling or tugging when you bend. The PivotLink is
designed to be « self-cleaning », but if dirt or debris begins to collect inside of
the metal, use compressed air, a soft brush and/or warm water with a mild
detergent to clean it. Check for free movement and make sure the PivotLink
does not bind. Do not apply lubricants to the PivotLink mechanism.
A.2 Web Finials
Web Finials on all adjustable webbing ends provide a gripping surface for
easier adjustment, in addition to providing a way to secure and organize the
loose webbing with the integrated clip.
A.3 Self-Contained Label Pack
The new self-contained label pack encapsulates labels minimizing damage and
loss. It is conveniently located on the chest for easy access, and it incorporates
integrated pull-free lanyard rings for securing lanyards when not in use.
TM
A.4 ErgoAmor Back Shield
Semi-Flexible ErgoAmor back shield minimizes impact from sharp/heavy snap
hooks and self-retracting lifelines.
1.e The back shield also provides two locations for custom labels.
The left for a company label, and the right for a high visibility individual worker
identification label. Both may be purchased separately. Please contact your sales
person or Miller customer service for more information on company specific ID.
Complete with integrated dorsal D-ring.
A.5 Integrated Accessory system
The integrated modular accessory system provides a wide variety of options for
attaching belts, tools, and accessories to your Revolution harness.
TM
A.6 DualTech Webbing
Miller's new DualTech Webbing makes donning easy with two-sided contrasting
colours and textures. The webbing is engineered with a shape-retention memory
for a more comfortable fit. In addition, the black outside and grey coloured inside
make identifying twisted straps when donning the harness easier. Also available
with DuraFlex webbing.
A.7 Cam Buckle
The Cam buckle allows easy one-hand adjustment and release of shoulder
straps. Their non-slip design promotes proper snug fit of the harness, and allows
for easy adjustment to accomodate seasonal clothing.
A.7
3