Siemens SCD 1297-K Betriebsanleitung Seite 59

Main menu Function
Option 2 DPMS
Source scan
Blank color
Display
Info signal source
Option 3 Noise suppression
Lock RGB Signal 1
Unlock RGB Signal 1
Lock RGB Signal 2
Unlock RGB Signal 2
Control panel SCD 1297-K
Adjust function / value / range
ON – OFF
OFF – ON – Standard
red – green – blue – black
–
ON – OFF
ON - OFF
ON <+ Key>
OFF <+ Key>
ON <+ Key>
OFF <+ Key>
Page 59 / 64
Description
Display Power Management System (DPMS) on or off
If DMPS activated, the monitor is turn off (backlight) when a
synch signal is left. The screen is dark.
Standard: ON
Note: To scan new video source is not relevant because the
monitor has one RGB input source only.
Choose the background color of the screen when no input signal
is present.
Display resolution (not from the input source)
Input source icon on or off
The icon is shown when input signal are changed. The icon
shows the following information's:
- signal source (e.g. RGB analog)
Mode number (internal mode number of the timing list)
-
Image resolution of the input signal
-
- H- and V-frequency
Standard setting OFF. At ON: Activation of function for noise
suppression in synchronization signals. Inhibits new auto-
alignment during display of a video signal when short-term noise
is present on synchronous signals.
Standard setting OFF. At ON: The video timing currently shown
will be stored, and processed with higher tolerance in H- and V-
frequency. I.e. the settings of this timing will always be used,
even if variations in H- and V-frequency will occur by noise.
Prevents erroneous recognition of timing when recognizing a
noisy video signal, e.g. showing up as wrong centering or
resolution of picture.
Standard setting OFF.
(Video timing 1 released again).
Standard setting OFF. At ON: The video timing currently shown
will be stored, and processed with higher tolerance in H- and V-
frequency. I.e. the settings of this timing will always be used,
even if variations in H- and V-frequency will occur by noise.
Prevents erroneous recognition of timing when recognizing a
noisy video signal, e.g. showing up as wrong centering or
resolution of picture.
Standard setting OFF.
(Video timing 2 released again).
Operating instruction
DOC-Nr.: b40008de3.doc