3.4.2.1. Quick-Osd-Menu - Siemens SCD 1297-K Betriebsanleitung

3.4.2.1. Quick-OSD-Menu

Function(s) of the control keys.
Key
MF2
Cursor
(+)
right
Cursor
(-)
left
Enter
MEN
Cursor
SET
Up/Down
Following adjustments can do via the Quick-OSD-menu:
Invoke via key <SET> or MF - Cursor Up/Down
Function
Invoke via key <+> or MF - Cursor Up
Function
Source digital DVI,
analog RGB
Control panel SCD 1297-K
Function
• Start Quick-OSD-Menu
• Increase the parameter value
• Selection of the input signal:
• Automatically alignment of the pictures
• Decrease parameter value
• No function in the Quick-OSD
• Start Quick-OSD-Menu
• Adjust the contrast / brightness
• Zoom and picture in picture characteristics
Adjustment / value
Range: 0 to 100
via key (+/-)
Range: 0 to 100
via key (+/-)
Adjustment / value
Press key <+> to select
Press key <+> to start
adjustment
Description
contrast adjustment
Match the display of the bright
picture parts
brightness adjustment
Match the display of the dark picture
parts
B Description
Selection of input-source
Perform an automatic image
adjustment. Adjustment of
frequency, phase and image
position.
Page 56 / 64
Operating instruction
DOC-Nr.: b40008de3.doc