Getting Started - Setup And Installation - Interacoustics AD629 Gebrauchsanweisung

AD629 Instructions for Use - US

3 Getting started - setup and installation

The following shows an overview of the AD629:
Monitors
peaker
Microphone
and
Headphone
(Headset)
mini jacks
Talk
forward
mic.
The top left part of the AD629 (display holder) contains monitor speaker.
The left side of the instrument contains two mini jack connectors for a microphone and a headphone – or
a headset. This is used for talkback headphone/speaker (TB) and talk forward microphone (TF).
A goose neck microphone can be plugged into the top part of the instrument just above the Talk Forward
button. This can be used for talk forward. When not plugged in the goose neck microphone can be placed
underneath the display. Please refer to the section about patient communication for more details.
The upper right side of the instrument holds the on/off switch of the instrument.
Make sure that the audiometer is placed so that the patient cannot see/hear of the clinician uses the
instrument
Back Panel - connectors
Page 7
Power
on/off
Front Panel
display &
buttons/dials