Basic Playback; Basic Operations - Yamaha AVX-S80 Bedienungsanleitung

Basic operations

You can play the software loaded on the audio and video
components connected to this system.
POWER
TV
SLEEP
TV MODE
INPUT
CH
MUTE
SUBTITLE
REC
CODE SET
HALL JAZZ
1
SPORTS MONO MOVIE
DSP program
5
buttons
/DTS SELECT
9
TOP MENU
LEVEL
PRESET
CH
ENTER
PRESET
TEST
B.BOOST
ON SCREEN
(U.S.A. model)
Indication on the front panel display (example):
SP
V I D E O 1 A U T O
Selected input source
1
Press POWER (
2
Turn on the AV component connected to this
system.
3
Press INPUT on the front panel repeatedly
(one of the input selector buttons on the
remote control) to select the input source.
The selected input source name and input mode
appear on the front panel display for a few seconds.
4
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.
E4-S80-19-26(6.29)b

BASIC PLAYBACK

POWER
AV SLEEP POWER ( )
TUNER
VOL
VCR
AUDIO
Input selector
VIDEO 2
buttons
VIDEO 1
CD
DVD
AMP
ROCK ENTERTAINMENT
2 3 4
MOVIE 1 MOVIE 2
6 7 8
MATRIX 6.1 STEREO
0 10 CANCEL
MENU
SET MENU MUTE
MUTE
ABCDE
CH
VOL + / –
B.BOOST
VOL
RETURN
VIDEO 1
Input mode
) to turn on the power.
19
5
Adjust the volume to the desired level.
The volume level is displayed digitally.
Example: –70 dB
Control range: VOLUME MUTE (minimum) to
0 dB (maximum)
Note
• If you have connected a recording component to the VCR OUT
jacks, and you notice distortion or low volume during playback
of other components, try turning the recording component on.
I Enhancing the bass tones
First press AMP, then press B. BOOST.
• "Bass Boost ON" appears in the display.
• This function enhances the bass tones of the
subwoofer by increasing the level of the low-range
frequencies.
• To cancel B. BOOST mode, press B. BOOST
again.
y
• The B. BOOST mode does not function when the headphones
are connected.
Note
• If a thudding noise is heard from the subwoofer when this
function is turned on, lower the subwoofer level. Otherwise, the
subwoofer may be damaged due to an excessive input level of
low-bass signal.
I To mute the sound
Press MUTE on the remote control.
To resume the audio output, press MUTE again.
y
• You can also cancel mute by pressing VOL +/–, etc.
• During muting, the "MUTE" indicator flashes on the front
panel display.
02.6.29, 4:33 AM
19