Commissioning; Safety; Symbols Used - Fronius VarioSynergic 3400 Bedienungsanleitung

Commissioning

Safety

Commissioning
Commissioning is subdivided and described in the following sections:
-
-
-
-
-
-
-
-
-
-

Symbols used

Important! Depending on your machine version, the main switch and mains supply can
be designed differently. The following symbols generally mean:
Warning! An electric shock can be fatal. If the machine is connected to the
mains electricity supply during installation, there is a high risk of very serious
injury and damage. Only carry out work on the machine when
- the mains switch is in the "O" position,
- the machine is unplugged from the mains.
Checking the mains voltage
Fitting the cooling unit
Connecting wirefeeder to power source
Connecting up the gas cylinder
Connecting the welding torch
Putting the cooling unit into service
Inserting/replacing feed rollers
Inserting the wirespool/inserting the basket-type spool
Feeding in the welding wire
Adjusting the brake
Switch off machine
Unplug machine from the mains
Connect machine to the mains
Switch on machine
12