To Tune In To A Particular Ensemble Without Searching - JVC KD-LHX601 Bedienungsanleitung

3
Start searching for an ensemble.
To search for ensembles of lower frequency.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service (either primary or
secondary) you want to listen to.
To select the previous service (either
primary or secondary).
To tune in to a particular ensemble
without searching
1
Press and hold FM/AM DAB repeatedly to
select the DAB tuner as the source.
2
Press FM/AM DAB repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
Press and hold ¢
3
"Manual Search" starts flashing on the
display.
Press ¢ or 4
4
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
Press 5 (up) or ∞ (down) to select a service
5
(either primary or secondary) you want to
listen to.
24
To search for
ensembles of higher
frequency.
To select the next
service. (If a primary
service has some
secondary services,
they are selected
before the next primary
service is selected.)
or 4
until
repeatedly until the
When surrounding noises interfere your
listening while driving
If this happens, especially when you are listening
at a low volume level, you can reinforce the
sounds to improve for your listening.
For this purpose, some service provides
Dynamic Range Control signals together with
their regular programme signals.
1
Press M (MODE) while listening to a DAB
service.
"Mode" appears on the display.
The next-step-operation buttons
start flashing.
2
Press number button 1 repeatedly to activate
the DRC function while "Mode" is still on the
display.
Each time you press the button, the DRC
function will be set as follows:
DRC 1
DRC Off
As the number increases, the DRC effect level
also increases.
After about
5 seconds
The DRC indicator appears
• The DRC indicator will be highlighted
( ) only when the unit received DRC
signals from the tuned service.
To cancel the DRC effect, select "DRC Off."
DRC 2 DRC 3