To Change The Display Information While Tuning Into An Ensemble; To Restore The Fm/Am Tuner; To Tune In A Particular Ensemble Without Searching - JVC KS-FX8R Bedienungsanleitung

3
To search
ensembles of higher
frequencies.
To search
ensembles of lower
frequencies.
4
MO
5
RND
∞
RPT
To stop searching before an ensemble is received, press the same button you have pressed
for searching.
To change the display information while tuning into an
ensemble
Normally service name is shown on the upper part of the display.
If you want to check the ensemble name or its frequency, press DISP.
Each time you press the button, the following information appears for a while on the upper
part of the display.
Service name

To restore the FM/AM tuner

Press and hold FM/AM/DAB for more than 1 second again.

To tune in a particular ensemble without searching:

1 Press and hold FM/AM/DAB for more than 1 second.
2 Press FM/AM/DAB repeatedly to select the DAB band (DAB1, DAB2, or DAB3).
3 Press and hold
¢ or
4 Press
• If you hold down the button, the frequency keeps changing until you release the button.
Select an service you want to listen to.
Ensemble name
¢ or 4 for more than 1 second.
4 repeatedly until the ensemble you want is reached.
Start searching an ensemble.
When an ensemble is received, searching stops.
Channel number Frequency
37