Display The Satellite Detection - Megasat Digital 1 HD Bedienungsanleitung

3. Quick Guide

3.2 Display the satellite detection

Satellit
LNB Typ
LO. LOW / LO. HIGH
Frequency
Symbol rate
Polarity
Search
Strength
Quality
LOCK
PWR
C/N
BER
FEC
Note:
Press in satellite detection the F1 key to display the signal strength and signal quality
as a large screen.
Displays the current satellite. Use the pq keys to change
the satellite. Press OK to enter the Satellite list. Use the t u
buttons to select from, and click OK.
Displays the current LNB type. Use the t u keys to change
the LNB type. Press OK to enter the LNB list. Use the pq
buttons to select the type and click OK.
Enter the frequency of the LNB manually. The LNB Type must
be set here individually (customised).
Displays the current transponder. Use the numeric keys to
enter a transponder, or press OK to select a transponder from
the preloaded list.
If you enter a transponder manually, you have to adjust the
symbol rate accordingly here.
Displays the polarity of the selected transponder to
Horizontal (Hor) or vertical (Ver).
With the previous settings, you can now search for the
desired transponder. The channels are automatically stored in
the satellite list.
Displays the current strength of the selected satellite.
Displays the current quality of the selected satellite.
Displayed when the preset satellite is found.
Displays the current dBµV value.
Displays the current C/N value.
Displays the current BER value.
Displays the current FEC value.
ENGLISH
07