Transport; Setup - Siemens CKA4820 V2 Benutzerhandbuch

2.2.1

Transport

2.2.2

Setup

Siemens Building Technologies
Fire Safety & Security Products
Damage during transport
Keep the packaging material for future transportation.
–
Do not expose the device to mechanical vibrations or shocks.
–
Damage due to unsuitable mounting location
The environmental conditions recommended by the manufacturer must be
–
observed. See Section 4: Technical data.
Do not operate the device close to sources of powerful electromagnetic
–
radiation.
Do not operate the device in excessively dusty places.
–
Do not expose the device to mechanical vibrations or shocks.
–
Protect the device against moisture.
–
Damage to the device due to overload
Use only the shielded video interface cable recommended in this document to
–
ensure compliance with the limits for digital output devices.
Risk of failure of the main device
Power cables to the main device are to be run separately and have a dedicated,
–
clearly labelled fuse.
Danger of electrical shock due to insufficient labelling
Terminals carrying an external voltage supply must be labelled "DANGER!
–
External voltage!"
Liability claim
For reasons of electromagnetic compatibility RS232, USB, audio in/out and
–
power supply cables must not exceed 3 meters length.
Damage to the device due to overvoltage
Connect the device only to power sources with the specified voltage. Voltage
–
supply requirements can be found on the power supply unit/type label. See
Section 4: Technical data.
Dangerous situation due to false alarm
Make sure to notify all relevant parties and authorities providing assistance
–
before testing the system.
To avoid panic, always inform all those present before testing any alarm
–
devices.
Safety
9
03.2009