Lista del menú (en el visualizador)
Las siguientes opciones están disponibles en cada menú.
"xx..." en la tabla significa el parámetro de cada elemento.
Menú
Elemento
Auto Calibration AUTO CAL START?
5 4 3 2 1
MEASURING: TONE
MEASURING: T.S.P.
MEASURING: WOOFER
COMPLETE
[xxxxxxxxxx]
WARNING CODE [xxx:4x]
NO WARNING
ERROR CODE [xxx:3x]
RETRY? [xxxx]
CANCEL
CAL TYPE [xxxxxxxxx] ENGINEER, FULL FLAT,
POSITION [xxxxxxxx]
NAME IN ? [xxxxxxxx]
Level Settings
TEST TONE [xxxxxxxx]
PHASE NOISE [xxxxxxx]
PHASE AUDIO [xxxxxxx] OFF, L/C, C/R, R/SL, R/SR, SR/SL,
FRONT L [xxx.xdB]
FRONT R [xxx.xdB]
CENTER [xxx.xdB]
SURROUND L [xxx.xdB]
SURROUND R [xxx.xdB]
SUR BACK [xxx.xdB]
SUR BACK L [xxx.xdB]
SUR BACK R [xxx.xdB]
SUB WOOFER [xxx.xdB]
D. RANGE COMP. [xxx]
132
ES
Parámetro
RETRY, SAVE EXIT, WRN CHECK,
PHASE INFO, DIST. INFO,
LEVEL INFO, EXIT
FL, FR, C, SLA, SRA, SLB, SRB, SBL,
SBR : 0, 1, 2, 3, 4
F, SR, SB : 0, 1, 2, 3, 4
YES, EXIT
FRONT REF, OFF
POS.1, POS.2, POS.3
OFF, L a SW (AUTO), L a SW (FIX)
OFF, L/C, C/R, R/SL, R/SR, SR/SL,
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
–10 dB a +10,0 dB (pasos de 0,5 dB)
–10 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
–20 dB a +10,0 dB (pasos de 0,5 dB)
OFF, AUTO, STD, MAX
Ajuste
inicial
SAVE
EXIT
YES
FULL
FLAT
POS.1
OFF
OFF
OFF
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
AUTO