Making calls to several callers simultaneously
NOTE
The following functions are only available if at least one addi-
tional, GAP-enabled handset is registered with the base station.
Transferring calls
You can accept a call and then transfer it to an additional, GAP-enabled
handset on the same base station.
During the call, press the key beneath the "Internal"
display entry.
"Call to handset" appears on the display, along with the
numbers of the handsets registered with your base station.
Use the and arrow keys to select the desired handset and then
confirm with the right control key "OK".
If you have registered only one additional handset, the free handset is auto-
matically selected.
You will now hear a ring tone on the called handset.
If the person at the other handset accepts the call, you can hold an internal
conversation with that person.
To transfer the call, press the call key or place the handset in the charge
cradle on the base station.
The caller is now connected to the person on the other handset.
Toggling and holding a conference call
If a second handset accepts the call as described above, you can toggle be-
tween the three subscribers or hold a conference call.
35