User Interface Introduction - PeakTech 1295 Bedienungsanleitung

User Interface Introduction

1 2
27
26
25
24
23
22
21
20
Figure 0-4 Illustrative Drawing of Display Interfaces
1. Waveform Display Area.
2. The state of trigger, including:
Auto: Automatic mode and acquire waveform without triggering.
Trig'd: Trigger detected and acquire waveform.
Ready: Pre-triggered data captured and ready for a trigger.
Scan: Capture and display the waveform continuously.
Stop: Data acquisition stopped.
3. T pointer indicates the horizontal position for the trigger.
4. The pointer indicates the trigger position in the internal memory.
5. Cursors for cursor measurement.
6. Present triggering value.
7. It indicates that there is a U disk connecting with the oscilloscope.
8. Setting time (touchable).
9. Cursor measure window, showing the readings of the two cursors and
absolute value.
10. The waveform of CH1.
4
3
19
18
97
5
6
17
7 8
9
10
11
12
13
14
15
16