Medion LIFE P18072 Bedienungsanleitung Seite 103

Menu Item Settings
AUDIO VIDEO
SHARING
POWER UP
MODE
VIRTUAL
REMOTE
CEC
(consumer elec-
tronics control)
CEC AUTO
POWER ON
SPEAKERS
(ARC)
40
Toggle audio-video sharing. This function allows data exchange with
other multimedia devices such as PCs, smartphones, cameras, etc. Read
the section "Video audio sharing – using network service" on page 45.
PLEASE NOTE!
If you disable the AUDIO VIDEO SHARING function,
you no longer be able to display audio, video or photo files
on the smart TV. The DMR function (digital media renderer) is
then switched off.
Select the power-on mode STANDBY or LAST STATE. When you
press the Power button, this turns the device on in standby mode or re-
trieves the most recently selected setting.
Activate/deactivate the virtual remote control. This allows the operation
of the TV via other devices.
Enable this function to enable the communication of all devices that are
connected via HDMI. In this way, you can, for example, control all devic-
es within an HDMI network using only one remote control. Enable this
function if you also want to specify settings under the following option:
SPEAKERS.
 First, enable the CEC function and select HDMI1 as a source. If you
have already connected a CEC-enabled device, the name of the de-
vice is listed instead of HDMI1. The basic functions of the device
can then be automatically controlled by using the remote control of
the smart TV.
PLEASE NOTE!
If the CEC feature is enabled and HDMI1 was selected as
the source (CEC-enabled device connected), the OSD menu of
the smart TV can no longer be called up via the MENU but-
ton.
This function allows you to turn on the TV with the connected HD-
MI-CEC-compatible device and automatically switch to the input source.
Select ENABLED if you want to use this function.
The default setting for the speakers is TV, so that only the internal
speakers are used for the sound output. This setting can only be
changed if you have previously enabled the CEC function. If you have
done so, it is possible to select the AMPLIFIER setting and integrate
an external amplifier into a CEC network via the HDMI1 port. The inter-
nal speakers are muted in this case. The volume buttons on the remote
control now control the device connected to the HDMI1 port (no OSD
display of the volume bar).
PLEASE NOTE!
Due the great variety of different devices, correct functioning
cannot be guaranteed.