Menu Item
PC POSITION
RESET
32
Settings
AUTOPOSITION
If you want to move the image, select the AUTOPOSITION
entry and press OK to move it back to the centre. This should be
done in the full image mode to ensure the settings match.
H POSITION
You can use to adjust the horizontal position of the picture.
You can use to adjust the vertical position of the picture.
V POSITION
DOT CLOCK
With this setting the picture signal is synchronised to match with
the monitor´s pixel rate. This corrects errors that can appear as
vertical stripes in pixel-dense images (like tables or text with small
fonts). Set the frame rate using .
If the PC picture is not clear, you can use to adjust the pic-
PHASE
ture signal to correspond to the smart TV pixels. This will result in
a clear image with an even, sharp display.
Use or OK to reset all picture settings to the factory defaults.