Setup > Mac Address Clone - Cisco Linksys WRT54GL Kurzanleitung

Chapter 3
DynDNS.org
Setup > DDNS > DynDNS
System Select the DynDNS service you use: Dynamic,
Static, or Custom. The default selection is Dynamic.
User Name Enter the User Name for your DDNS account.
Password Enter the Password for your DDNS account.
Host Name
The is the DDNS URL assigned by the DDNS
service.
Mail Exchange (Optional)
exchange server, so e-mails to your DynDNS address go to
your mail server.
Backup MX This feature allows the mail exchange server
to be a backup. To disable this feature, keep the default,
No. To enable the feature, select Yes. If you are not sure
which setting to select, keep the default, No.
WildCard This setting enables or disables wildcards
for your host. For example, if your DDNS address is
myplace.dyndns.org and you enable wildcards, then
x.myplace.dyndns.org will work as well (x is the wildcard).
To disable wildcards, keep the default, Off. To enable
wildcards, select On. If you are not sure which setting to
select, keep the default, Off.
Internet IP Address The Router's Internet IP address is
displayed here. Because it is dynamic, it will change.
Status
The status of the DDNS service connection is
displayed here.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless-G Broadband Router
Enter the address of your mail
Advanced Configuration
TZO.com
Setup > DDNS > TZO
E-mail Address, Password, and Domain Name
the settings of the account you set up with TZO.
Internet IP Address
The Router's Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed here.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification. Some ISPs will require
you to register a MAC address in order to access the
Internet. If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature.
Setup > MAC Address Clone
MAC Address Clone
Enable/Disable To have the MAC Address cloned, select
Enable.
User Defined Entry
Enter the MAC Address registered
with your ISP here.
Clone Your PC's MAC Clicking this button will clone the
MAC address of the computer you are using.
Enter
9