Front Circuit Board, Display Module And Keypad Disassembly - Motorola P100 Serie Servicehandbuch

Maintenance – Full Keypad Models:Disassembling and Reassembling the Radio
O-Ring
Battery Contact Seal
Figure 6-9. Main Circuit Board, Finger Strips, O-ring and Battery Contact Seal Removal (UHF1)
O-Ring
Battery Contact Seal
Figure 6-10. Main Circuit Board, Finger Strips, O-ring and Battery Contact Seal Removal (UHF2)

6.5.1.3 Front Circuit Board, Display Module and Keypad Disassembly

1. Push the latches on the Front Circuit Board (36) to release the Liquid Crystal Display (LCD)
flexible cable from the connector.
2. Remove the five screws holding the Front Circuit Board to the front housing with a Phillips
screwdriver.
Finger Strip
Finger Strip
6-11