Product Information - SOLTRON M-60 SUPER POWER Gebrauchsanleitung

Please read and observe ...

Product information

Acrylic glass panels
The acrylic glass panels for the tanning devices are produced of acrylic
glass developed especially for this application. The acrylics used are
characterised by a particularly high UV permeability and resistance, as
well as an easy-care, hygienic surface that is gentle to the skin.
The acrylic glass panels are formed to their shapes for the specific devic-
es in a technically complex production process. Despite state-of-the-art
production know-how, the presence of minor spots, air bubbles or
streaks in the acrylic panels is unavoidable. In addition, hairline cracks
can occur on the bed surface during operation.
These occurrences are material-dependent and are unavoidable in
processing, however have no significant effect on the utility value and
can therefore not be recognised as defects.
Caution!
Cosmetics or sun screen products must be removed prior to tan-
ning as they can cause damage (e.g. cracks on the surface)
when used continuously.
44
UV high-pressure lamps
Fire hazard!
High pressure lamps that have not been approved by Soltron
can explode. Hot lamp components can set other parts on fire.
People can be killed or severely injured due to smoke and fume
inhalation.
– Only fit high pressure lamps recommended by Soltron.
– Clean the inside of the tanning device regularly. Fluff is in-
flammable!