Troubleshooting; Appendix; Disposal Of The Appliance - Silvercrest SEF 2300 A1 Bedienungsanleitung

Troubleshooting

GB
IE
PROBLEM
The appliance is not
working.
or
The control lamp integrated
into the on/off switch 7
does not light up.
The appliance has switched
itself off during use and
cannot be switched back
on.
The green control lamp 8
does not light up.
If the malfunction cannot be corrected with the above suggestions, or if you have determined
that the malfunction may have other causes, please contact our Customer Service.

Appendix

Disposal of the appliance

18
POSSIBLE CAUSE
The appliance is not connected
with a mains power socket.
The appliance is damaged.
The on/off switch 7 has not
been activated.
The heat protection function
has been activated.
The heat protection function
has been activated.
The selected temperature for
the cooking oil/fat has not
been reached.
Never dispose of the appliance in the normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please observe the currently applicable regulations. Please contact
your waste disposal centre if you are in any doubt.
POSSIBLE
SOLUTIONS
Connect the appliance to
a mains power socket.
Contact Customer Services.
Press the on/off switch 7.
1. Remove the power plug
and allow the appliance
to cool down.
2. Press the reset button on
the control and heating
element 0.
1. Remove the power plug
and allow the appliance
to cool down.
2. Press the reset button on
the control and heating
element 0.
Wait a few minutes until the
required temperature has
been reached.
SEF 2300 A1