Installation; Preliminary Operations - Saeco Syntia Bedienungsanleitung

INSTALLATION

For your own and for other people's
safety, carefully follow the instruc-
tions provided in the "Safety Regula-
tions" section.
Machine Packaging
The original packaging has been designed
and constructed to protect the machine
during transport. We recommend keep-
ing the packaging material for possible
future transport.

Preliminary Operations

• Remove the coffee bean hopper lid
and the drip tray with grill from the
packaging.
• Remove the coff ee machine from the
packaging and position it in a place
that meets the requirements described
in the safety regulations.
• Place the drip tray with grill into its
appropriate seat on the machine. Make
sure it is fully inserted and clicks into
place.
• Place the coff ee bean hopper lid on the
bean hopper.
Note: Insert the plug in the
machine and in the wall so-
cket only when indicated and check
that the power button is switched
to "0".
Important Note: Carefully
read the explanations of all
the warnings displayed on the LCD
control panel (section "LCD Display
Warnings").
Never remove the drip tray
when the machine is turned
on. Wait a couple of minutes after
turning on/off, since the machine
will be carrying out a rinse/self-
cleaning cycle (see section "Rinse/
Self-cleaning Cycle").
• Remove the water tank and install the
Intenza water fi lter as recommended
on page 27.
• Fill the tank with fresh drinking water.
Do not exceed the "max" level indi-
cated on the water tank. Once filled,
place the tank back into the machine.
Fill the tank only with fresh,
non-sparkling water. Hot wa-
ter or any other liquid may damage
the tank and/or the machine. Do not
turn on the machine when the tank
is empty. Make sure there is enough
water in the tank.
• Remove the coff ee bean hopper lid.
Note: The hopper may be pro-
vided with different safety
features according to the regula-
tions of the country of use of the
machine.
• Slowly pour the coff ee beans into the
hopper.
Only coff ee beans may be put
into the coff ee bean hopper.
Ground coffee, instant coffee or
any other object may damage the
machine.
• Replace the coff ee bean hopper lid.
• Insert the plug into the socket on the
back of the machine.
• Insert the plug of the other end of the
cable into a wall socket with suitable
power voltage.
• 29 •