Adjusting Quantity And Taste; Saeco Adapting System; Adjusting Coffee And Milk Length; Adjusting Coffee Strength - Philips Saeco Incanto Bedienungsanleitung

English
20

Adjusting quantity and taste

Saeco Adapting System

Adjusting coffee and milk length

ESPRESSO

Adjusting coffee strength

Caution: Only select 'Hot water' in the menu when the hot water
dispensing spout is installed.
2 Press the OK button to confirm.The display reminds you to install the hot
water dispensing spout, press the OK button to confirm. The machine
starts dispensing hot water.
-
To stop dispensing hot water, press the OK button.
Coffee is a natural product and its characteristics may vary according to
origin, blend and roasting. The machine is equipped with a self-adjustment
system that allows it to get the best taste out of your favorite coffee beans.
It regulates itself after brewing some coffees.
You can adjust the quantity of beverage brewed according to your taste and
to the size of the cups.
1 To adjust the length of espresso, press and hold the ESPRESSO button
until the display shows the MEMO icon.
-
The machine enters the programming phase and starts to brew the
selected beverage.
2 Press the OK button when the cup contains the desired amount of
espresso.
-
The tick on the display shows that the button is programmed: every
time it is pressed, the machine will brew espresso in the amount set.
To set the length of espresso lungo, cappuccino and latte macchiato,
follow the same procedure: press and hold the button of the beverage
and press the OK button when the desired amount is in the cup. To
adjust the length of milk-based coffee beverages, insert the milk
carafe and save the milk volume first and then save the coffee
volume.
To change the coffee strength, press the AROMA STRENGTH button. Each
time you press the AROMA STRENGTH button, the aroma strength changes
by one degree. The display shows the chosen strength, which will only be
saved when brewing a coffee.