Preparation - Beem Espresso Perfect Crema Plus Bedienungsanleitung

Espresso Perfect Crema Plus
Removing the strainer holder
(image C1)
To remove the strainer holder, proceed as
follows:
Turn the handle (8) of the strainer
‹
holder (7) to the left until the handle
is under the symbol of the strainer
holder mounting.
Pull the strainer holder down out of
‹
the strainer holder mounting.
Inserting the strainer holder
(image C2)
To install the strainer holder, proceed as
follows:
Hold the strainer holder (7) using the
‹
handle (8) under the
strainer holder mounting (5) and push
the strainer holder into the mounting
from below.
Turn the handle (8) of the strainer
‹
holder (7) to the right until the handle
is under the symbol
NOTE
► While inserting, take care not to tilt
the strainer holder.
34
To make espresso/coffee with coffee pow-
der, proceed as follows:
symbol of the
.

Preparation

Making espresso/coffee
with coffee powder
Check the water level in the water
‹
tank (17) and add water, if necessary.
Remove the strainer holder (7) and
‹
insert the desired strainer insert (6).
NOTE
► The deeper strainer insert (6a) can
hold coffee powder for 2 cups of
espresso or one large cup of coffee.
► Use the shallower strainer insert (6b)
for preparing one cup of espresso/
coffee.
Fill the strainer insert (6) with coffee
‹
powder to the top and wipe off any
excess coffee powder with the handle
of the measuring spoon.
NOTE
► Do not overfill the strainer insert. An
overfilled strainer insert cannot be
inserted into the appliance.
Press the coffee powder lightly but
‹
firmly using the compacting aid (12).
NOTE
► Remove any surplus coffee powder
from the edge of the strainer holder
in order not to stain the seal of the
strainer holder mounting (5).
BEEM - Elements of Lifestyle
EN