Sensors To Change The Set Values; Oven Interior; Accessories; Before Using The Oven For The First Time - Junker JB23PP50 Gebrauchsanleitung

Sensors to change the set values

@ A
With the or sensors all fixed and recommended settings
can be changed.
@
= Increase programmed values.
A
= Reduce programmed values.
Ranges
30-270 Temperature
range
1-3 Grill power
Cleaning levels
1 sec. - 23:59 h.
1 sec. - 23:59 h.
When the oven is heating, the
panel. This light goes off when heating is paused. The symbol
does not light up for grill power and cleaning levels.

Oven interior

The oven includes a fan and light.
Light
The oven light remains on while the oven is on. The light
switches off at set temperatures of up to 60ºC and during the
clean function. This ensures optimum precision control.
However, the light can be turned on without the oven being on
by setting the function control knob to
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.

Before using the oven for the first time

In this section, you can find out what you must do before using
your oven to prepare food for the first time. First read the
section on Safety information.

Setting the time

Once the oven has been connected, the
light up on the display panel. Set the clock to the right time.
0
Press the sensor.
1.
The display panel displays the time
@
2. Set the time with the or
Confirm the time with the
3.
The programmed time is displayed after a few seconds.
24
The temperature inside the oven in
ºC.
The different levels for the large
š
surface grill .
1 = level 1, low
2 = level 2, medium
3 = level 3, high
V
Self-cleaning levels .
1 = level 1, low
2 = level 2, medium
3 = level 3, high
Cooking time.
Time set on the timer.
s
symbol lights up on the display
\
.
0 ‹ ‹‹
and :
‚ƒ ‹‹
.
A
sensors.
0
sensor.

Accessories

Racks may be positioned in the oven at 5 different heights.
Up to 2/3 of a rack may be pulled out without it tipping over.
This makes it easy to remove food.





Racks may deform as they heat up. Once they have cooled, the
deformation disappears and their operation is unaffected.
Your oven is supplied with only some of the following
accessories.
Accessories may be purchased from the Technical Assistance
Service or from specialist retailers. Please refer to the sales
catalogue for available accessories.

Heating the oven

To remove the "new" smell, heat the oven empty with the door
closed. The most effective option is to heat the oven for one
hour with the top and bottom heating elements
240 ºC. Check that no packaging has been left inside the oven.
1. Select top and bottom heating
symbols
knob.
@
2. Press the
panel.
Turn the oven off after one hour. To do this, turn the function
control knob to zero.

Cleaning the accessories

Before using the accessories for the first time, clean them
thoroughly using a cloth, hot water and a little soap.
Shelf
For pans, baking tins, roasts, grilled
items and frozen meals.
Flat enamel oven tray
For cakes, pastries and biscuits.
Place the tray in the oven with its
raised lip facing the door.
Universal deep enamel tray
For runny cakes, pastries, frozen
meals and large joints for roasting.
This can also be used as a tray to
collect the fat when roasting directly
on the shelf.
Place the tray in the oven with its
raised lip facing the door.
%
using the function control
sensor until 240 ºC is displayed on the display
%
set at