Troubleshooting; Warranty; Disposal - Dometic Cup Cooler Montage- Und Bedienungsanleitung

Troubleshooting

8 Troubleshooting
Problem Possible cause
LED lights are Fuse has blown.
not on when
the switch is
There is no voltage.
on.
Unit's high-heat cut
off is at 65 °C and if
reached, unit will shut
down. This is usually
caused by lack of air
flow or high ambient
temperature.
9

Warranty

The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see the
back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
10

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
12
Suggested remedy
Check for blown fuse on unit, on house
battery, or an open circuit breaker.
Verify polarity of DC voltage: Positive to
positive and negative to negative.
Make sure all electrical connections are
tight.
If 12 V DC power is available and unit is
not working, unit needs to be replaced.
Ensure good ventilation.
Cup Cooler
EN