Operation; Cleaning And Maintenance - Dometic Cup Cooler Montage- Und Bedienungsanleitung

Cup Cooler
6

Operation

I
NOTE
 Make sure beverage container is in contact with optimum area
of cooler.
 If the cooling fan is clogged with debris, wipe or brush it clean
(fig. 4 1, page 5). Do not spray with water.
 Check for proper ventilation around the unit (fig. 4 2, page 5).
Poor ventilation will cause poor cooling capacity.
 In cold ambient temperatures the Cup Cooler may freeze cold
beverages.
➤ Power on the switch that controls the Cup Cooler.
➤ Allow 2 to 3 minutes for the Cup Cooler to chill.
➤ Between sips, store your can, bottle, or any appropriately sized beverage
container in the Cup Cooler.
7

Cleaning and maintenance

A
NOTICE!
 Do not use sharp or hard objects or cleaning agents for clean-
ing as these may damage the product.
 Do not use an abrasive cleaner to clean the stainless-steel trim
ring. It will scratch the surface.
 Do not use an abrasive cleaner to clean the cooler bore. It has
an anti-stick coating and it will be damaged.
➤ Occasionally clean the product with a damp cloth.
EN
Operation
11