Mounting; Orientation; Rigging; Mounting Diagram - Chauvet Swarm 5 FX Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Mounting

Swarm™ 5 FX User Manual Rev. 4

Before mounting the product, read and follow the safety recommendations indicated in the

Safety

Notes. Use at least one mounting point per product. Make sure the mounting clamp

(such as CLP-15 from Chauvet) is capable of supporting the weight of the product. For our

Chauvet line of mounting clamps, go to www.chauvetlighting.com/cables-clamps-main.html.

The Swarm™ 5 FX must be mounted in a position that includes planning for safe laser usage. In

addition, make sure adequate ventilation is provided around the product.

· Before deciding on a location for the product, always make sure there is easy access to the

product for maintenance and programming.

· Make sure that the structure or surface onto which you are mounting the product can support

the product's weight (see

· When mounting the product overhead, always use a safety cable (such as CH-05 from

Chauvet). Mount the product securely to a rigging point, such as an elevated platform or a

truss.

· When rigging the product onto a truss, you should use a mounting clamp of appropriate

weight capacity. The bracketed has a 13-mm hole, which is appropriate for this purpose.

· The bracket adjustment knobs allow for directional adjustment when aiming the product to

the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could

damage the knobs.

Mounting Clamp

Mounting Bracket

Technical

Specifications).

Bracket Adjustment

Knob x2

Safety Cable

Page 17 of 108

Inhaltsverzeichnis