Working With The Equipment; Fitting; Screwing On The Base; Inserting The High-Pressure Hose - Parkside PTL 4 A1 Originalbetriebsanleitung

GB IE

Working with the equipment

CAUTION. pressure wash-
ers can be dangerous if they
are not operated correctly!
The jet must never be direct-
ed at people, animals, elec-
tric equipment con-nected to
the power supply or against
the actual pressure washer.
• Do not direct the jet at yourself or others
in order to clean clothes and shoes.
• Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
• Take appropriate measures to keep chil-
dren away from the equipment whilst it
is running.
• Dispose of the packaging material cor-
rectly.
• Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• Store the equipment in a dry place and
out of reach of children.
• Children should be supervised to en-
sure that they do not play with the ap-
pliance.
• Follow the security tips of your high-
pressure washer.
• The operator or user is responsible for
any accidents or personal injury and/
or material damage to third parties or
their property.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not use for cleaning windows.
6
NI
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the ap-
proval of the manufacturer.
• Protect the patio cleaner from frost
• Use only original accessories and do
not carry out conversion work on the
equipment.

Fitting

Screwing on the base

Screw on the base (14) to the thread so-
cket on the handgrip (11).
Tighten the base solely by hand.
Inserting the high-pressure
hose
1. Slide the high-pressure hose (17) with
connection for the angle piece (19)
first into the opening for the high-pres-
sure hose (10).
2. Slide the high-pressure hose (17)
through the main tube (7) and the
first, second and third telescopic tube
(6,5,4). Slide the high-pressure hose
(17) until it starts to exit from the third
telescopic tube (4) with the connection
for the angle piece (19).
3. Insert the connection for the telescopic
tube (18) into the connection for the
high-pressure hose (
handgrip (11). It will lock into place.
12) on the