Replace Ignition Burner Nozzle; Replace The Nameplate - Salvis ProfiLine Griddle Plate Betriebsanleitung

en
9.3

Replace ignition burner nozzle

9.4

Replace the nameplate

40 / 48
Primar
y air
sleeve
Compr
Liquefied petroleum
ession
gas, city gas and
spring
natural gas = 50 %
Ignition
burner
nozzle
Locking
screw
Label, types of gas
‒ in the device
‒ in the base unit
Remove front panels, refer to page 44 Chapter
10.5!
. Determine ignition burner nozzle, refer to
page 9.1.2 Chapter 9.1.2
. Screw in the ignition burner nozzle to the stop.
. Check all gas-bearing parts for tightness.
● After changing the type of gas, the changed
type of gas must be documented on the de
vice.
● When the nozzle sets are delivered, a blank
label is included to identify the types of gas.
. Indicate the type of gas used on the label.
. Degrease the old label before bonding.
. Bond the new label with the actual identifica
tion onto the old label.