►
►
Insert the masthead fly (12) from the
top in the clamp on the upper part of the
mast (9).
►
►
Draw the main halyard (13), with the end
without snap hook, from the side with the
groove, through the eye on the upper
part of the mast (9).
►
►
Hook both shroud ropes (14) on both lo-
wer eyes of the upper part of the mast (9).
22
►
►
Hook the foresail (15) on the eye located
over the upper part of the mast (9).
►
►
Erect the mast and insert it in the cone in
the middle of the crossbeam (1,4,8).