Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell 918301 Originalbetriebsanleitung

2.3 Technical data

Nominal voltage
Saw blade speed while idling
Saw blade speed at normal load
Cutting depth 0°/30°/45°
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight with rechargeable battery
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable circular saw MS 55 / 36 V complete with:
1 carbide-tipped circular saw blade Ø 160 mm (6 5/16 in.), 16 teeth
1 riving knife / splitter (thickness 1.2 mm / 1/16 in.)
1 parallel guide fence
1 service tool in bracket on the machine
1 carrying case
1 operating manual
1 folder "Safety Instructions"
1 charger APS 36
2 batteries 36 B 94
1 operating instructions APS 36
Sound power level
102 dB (A)
99 dB (A)
.
2
36 V
3800 rpm
3000 rpm
10 - 55 mm (3/8 – 2 3/16 in.) / 12 – 50 mm
(1/2 – 1 15/16 in.) / 12 - 42mm (1/2 – 1 5/8
in.)
0 - 45°
160/149 mm (6 5/16 in./5 7/8 in.)
1.2 mm (1/16 in.)
1.6 mm
20 mm
35 mm (1 3/8 in.)
4,3 kg
205 x 355 x 262 mm (8 1/16 x 13 31/32 x
10 5/16 in.
Workplace-related emission value
91 dB (A)
88 dB (A)
-18-