Warranty; Accessories And Spare Parts En; Ec Declaration Of Conformity En - Kärcher HDS Super M Eco Originalbetriebsanleitung

Direction of rotation is wrong. With cor-
–
rect direction of rotation a strong airflow
can be felt out of the exhaust opening of
the burner.
Figure 16
 Check direction of rotation. Exchange
the poles at the device plug, if required.
No ignition spark
–
 If device is in use and no ignition spark
can be seen through the viewing glas,
have device checked by customer serv-
ice.
Set temperature is not achieved
while using hot water
Working pressure/flow rate to high
–
 Reduce working pressure/flow rate
through regulating spindle (Figure 9).
Sooty heating spiral
–
 Have device de-sooted by customer
service.
If malfunction can not be fixed, the de-
vice must be checked by customer serv-
ice.

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Accessories and Spare Parts
Only use accessories and spare parts
–
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
At the end of the operating instructions
–
you will find a selected list of spare parts
that are often required.
For additional information about spare
–
parts, please go to the Service section
at www.kaercher.com.
34
EC Declaration of Conformity
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product:
Type:
Type:
Type:
Type:
Relevant EU Directives
97/23/EC
2000/14/EC
2004/108/EC
2006/42/EC (+2009/127/EC)
1999/5/EC
Component category
II
Conformity procedure
Module H
Heating coil
Conformity assessment Module H
Safety valve
Conformity assessment Art. 3 para 3
control block
Conformity assessment Module H
various pipes
Conformity assessment Art. 3 para 3
Applied harmonized standards
EN 55014–1: 2006 + A1: 2009
EN 55014–2: 1997 + A2: 2008
EN 60335–1
EN 60335–2–79
EN 61000–3–2: 2006 + A2: 2009
EN 61000–3–3: 2008
EN 61000–3–11: 2000
(HDS 655, HDS 1195, HDS Super)
EN 300 330-2 V1.3.1 : 2006
EN 301 489-1 V1.6.1 : 2005
EN 301 489-3 V1.4.1 : 2002
EN 62233: 2008
Applied specifications:
Based on AD 2000
Based on TRD 801
Name of the appointed agency:
– 11
EN
High-pressure cleaner
1.025-xxx
1.026-xxx
1.027-xxx
1.028-xxx