Midi-Datenformat - Yamaha CS1D Handbuch

MIDI-Datenformat

1. TRANSMIT/RECEIVE DATA
1.1 CHANNEL MESSAGE
1.1.1 CONTROL CHANGE (Bn)
<<Reception>>
In SINGLE CH mode when BANK is ON, these messages will be
received on the matching [Rx CH] from the MIDI IN for which BANK
SELECT reception is specified. These messages will determine the
bank of the next-received program change.
<<Transmission>>
In SINGLE CH mode when BANK is ON, a Bank Select message will
be transmitted from the selected MIDI OUT according to the [Tx CH]
setting when a scene memory or effect library is recalled.
STATUS 1011nnnn Bn
00000000 00
0vvvvvvv vv
00100000 20
0vvvvvvv vv
1.1.2 PROGRAM CHANGE (Cn)
<<Reception>>
These messages will be received on the matching [Rx CH] from the
MIDI IN specified for reception. However if [OMNI] is ON, they will
be received regardless of the channel.
If [PROGRAM CHANGE ECHO] is ON, these messages will be
echoed.
According to the [Program Change table] settings, these messages will
recall scene memories or effect libraries.
<<Transmission>>
When a scene or effect library is recalled, these messages will be
transmitted on the [Tx CH] according to the settings of the [Program
Change table] if [Program Change TX] is ON.
If the recalled memory number has been assigned to two or more
program numbers, the program number of the lowest-numbered
channel and lowest-numbered bank will be transmitted.
STATUS 1100nnnn Cn
DATA 0nnnnnnn nn
1.2 ACTIVE SENSING (Fe)
<<Reception>>
Once this message has been received, an interval of 300ms or more
during which no message is received will cause MIDI communications
to be initialized, clearing Running Status etc.
STATUS 11111110 FE
Control Change
Bank Select MSB
MSB Value
Bank Select LSB
LSB Value
Program Change
Program No. ( 0-127)
Active Sensing
2. TRANSMISSION CONDITION
BANK ON
CONTROL CHANGE
BANK SELECT $BnH
PGM Tx ON
PROGRAM CHANGE $CnH
MIDI IN
3. RECEIVE CONDITION
BANK ON
MIDI Rx CH?
PGM Rx ON
PGM OMNI ON
MIDI IN
ECHO ON
MIDI-Datenformat
MIDI TX CH?
MIDI OUT
ECHO ON
$BnH CONTROL CHANGE
BANK SELECT
$CnH PROGRAM CHANGE
MIDI OUT
579