Zertifizierung - Parker 650V Handbuch

Zertifizierung

Zertifizierung bei
In accordance with the EEC Directive
Konformität mit
der EMV-
Richtlinie, wenn
We Parker SSD Drives, address as below,
der Antrieb als
relevante
declare under our sole responsibility that
Apparatur
the above Electronic Products when
eingesetzt wird.
installed and operated with reference to the
instructions in the Product Manual
(provided with each piece of equipment) is
in accordance with the relevant clauses
from the following standard:-
Dies dient als
We Parker SSD Drives, address as
Hilfe zur eigenen
below, declare under our sole responsibility
Beurteilung der
that the above Electronic Products when
EMV-
installed and operated with reference to the
Entsprechung,
instructions in the Product Manual
wenn der Antrieb
als Komponente (provided with each piece of equipment) is
eingesetzt wird.
in accordance with the relevant clauses
from the following standard:-
BSEN61800-3 (2004)
* Compliant with the immunity requirements of the Standard without specified EMC filters.
* 690PB only when fitted with an internal or external filter.
P A R K E R S S D D R I V E S
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
650V Frequenzumrichter
Zertifizierung des Frequenzumrichters
EC D
ECLARATIONS OF
Date CE marked first applied: 01.04.2000
EMC Directive
2004/108/EC
* BSEN61800-3 (2004)
M
ANUFACTURERS
EMC Declaration
Dr Martin Payn (
652V
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker SSD Drives, address as below,
declare under our sole responsibility that
the above Electronic Products when
installed and operated with reference to
the instructions in the Product Manual
(provided with each piece of equipment), is
in accordance with the relevant clauses
from the following standard :-
EN61800-5 (2007)
D
ECLARATIONS
Machinery Directive
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation
using this equipment may only be put into
service when the safety considerations of
the Directive 89/392/EEC are fully adhered
Particular reference should be made to
EN60204-1 (Safety of Machinery -
Electrical Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
Der Antrieb erhält
das CE-Zeichen,
wenn er bei
korrekter Installation
den Vorschriften ge-
mäß Niederspan-
nungsrichtlinie für
elektrische Anlagen
und Geräte im
Spannungsbereich
entspricht.
Weil potentielle
Gefahr meist
elektrischen und
nicht mechanischen
Ursprungs ist, fällt
der Antrieb nicht
unter die
Maschinen-
richtlinie. Es kann
to.
jedoch eine
Erklärung des
Herstellers geliefert
werden, wenn der
Antrieb (als
Komponente) in
einer Maschine
eingesetzt wird.
10-15