Christopeit Sport EL 5 Montage- Und Bedienungsanleitung Seite 23

Step 5:
Installation of handgrips (41) at connecting tubes (38).
1. Push the handgrip bars (41L+41R) onto the connecting tubes (38) and
adjust the holes in the tubes so that they are aligned.
(Note: the handgrip bars must be aligned after assembly so that the
upper ends are inclined outwards (away from the support (49)).
2. Push the bolt M8x16 (39) with curved washers 8//20 (40) and spring
washer for M8 (8) through the holes and tighten the handgrip bars (41)
firmly.
Step 6:
Attach the handle grip (48) at support (49).
1. Push a washer 8//16 (25) and a spring washer for M8 (8) onto each screw
M8x25 (51). Place the handle grip (48) against the holder at support (49)
and tighten the handle grip (48) at handlebar support (49) firmly.
2. Cover the connectionpoint of handlegrip (48) with handlebarcover (56).
Step 7:
Attach the computer (44) at support (49).
1. Put the plug of connection cable (55) into the plug from computer (44)
backside.
2. Insert the plug of pulse cable (46) to the jack of the computer (44) and
attach the computer (44) to top monitor bracket of front post (49) with
screws M5x10 (50) and washers 5//10 (30). (Attention: Ensure that the
cables are not crunched or pinched during installation.)
Step 8:
Attach the AC adapter (13).
1. Please insert the plug of adaptor (13) to the DC socket (32) at end of
chain guard (95).
2. Please insert the plug of adaptor (13) to the jack of wall power
(230V~50Hz).
Step 9:
Checks
1. Check the correct installation and function of all screwed and plug con-
nections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
23