Dispensing Steam (Cappuccino); Cleaning, Repairing Or Servicing; Storage Or Disposal - Quick MILL 03000 Instruktionshandbuch

Istruzioni 03000-012 23-11-2011
Mod. 03002 - Mod. 03011
• Repeat the same operations up to point 3 of mod. 03000 - Mod.
03010.
5. Put the quantity regulation knob 6 at maximum.
6. Press the coffee switch 4 until it goes off automatically.

8. DISPENSING STEAM (CAPPUCCINO)

When you start dispensing, the hot water may spray.
The pipe can get very hot, do not touch it with your hands.
Danger of getting burned!
Series 03000
• Remove the filter holder 15 or 18 extract the steam wand 10.
• Wait for the warning light 3 to go out.
• Put the mixer 11 in the steam wand 10.
• Put the steam wand 10 and mixer 11 in the cold milk to be
heated.
• Press the steam switch 5 when the beverage is the right
temperature and has the right amount of froth turn off the switch.
The same procedure can be used for
heating other beverages.

9. CLEANING, REPAIRING OR SERVICING

Before cleaning, repairing or servicing the coffee machine,
unplug it and wait until it cools off.
22
QUICK MILL
14:54 Pagina 21
9.1 REPAIRING AND SERVICING
Do not open the machine, in the event of faults requiring repairs or
servicing, only contact a Service Centre authorised by QUICK MILL.
The manufacturer shall not be held liable for inadequate servicing.
9.2 CLEAN
Water always contains some lime which builds up in the machine
pipes over time. Descaling needs to be carried out every _ months
when the water delivery starts to decrease.

10. STORAGE OR DISPOSAL

If the coffee machine is not going to be used for a long time, unplug
it, protect it from atmospheric agents (dust, dirt etc.) and put it in a
safe place out of the reach of children.
If you decide you are no longer going to use the coffee machine,
make it unusable by cutting the cord after unplugging it.
Range 03000
Use descaling products for coffee machines which are non-
toxic and available on the market.
Follow the instructions on the product package.