Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Of Docking Station And Charging For The Cleaner; Automatic Recharging; Manual Charging - Fakir ROBERT-L Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB

7-3 Installation of Docking Station and Charging for the Cleaner:

Automatic recharging:

1. Install the Docking Station on the flat ground firmly and
against the vertical wall.
2. No obstacle or hollow areas 3m away from the Docking
Station in the front and 0.5m on the right and left. (Refer to
Figure 1)
3. The Cleaner cannot search the Docking Station for charging if
the infrared signal transmitting window of the recharger is
covered.
4. Connect the output terminal of the adaptor with DC socket of
the Docking Station. (Refer to Figure 2)
Please place the power cord of the
adaptor along the wall, or it may
interfere with the brush or wheels.

Manual charging:

1. You can use the adaptor or Docking Station of the
Cleaner to charge for the main body directly.
2. Connect the output terminal of the adaptor with DC
socket of the main body while using the adapter for
charging. (Refer to Figure 1)
3. Before charging, connect the adaptor with the
Docking Station , make sure the cleaner abut
against the Docking Station. (Refer to Figure2)
72
ROBERT-L
Figure 1
High Voltage! Electrical
hazard! Please dry your
hands before using!
Figure 2
High Voltage! Electrical
hazard! Please dry your
hands before using!
Figure 1
High Voltage! Electrical
hazard! Please dry your
hands before using!
Figure 2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis