Herunterladen Inhalt Inhalt Diese Seite drucken

Setup Before Using; About Bluetooth; Before Using Hands-Free Phone/Audio Function; How To Connect To A Bluetooth Compatible Device (Pairing) - Alpine KCE-350BT Bedienungsanleitung

Bluetooth interface
Vorschau ausblenden Andere Handbücher für KCE-350BT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15

Setup Before Using

About Bluetooth

Bluetooth is a short distance wireless technology to connect a
mobile phone or personal computer. This allows you to
enable a hands-free call or transmit data between Bluetooth
compatible devices.
• Depending on the Bluetooth version, a Bluetooth compat-
ible device may not be able to communicate with this
adapter.
• Proper function of this adapter with all Bluetooth
compatible devices is not guaranteed.
• Depending on the surroundings, Bluetooth wireless
connection may be unstable.
• When you place a call, or perform setup operations, be
sure to stop your car in a safe place.
• For details on the control (selection, enter, cancel) from the
connected unit, refer to the Owner's Manual of the
respective unit.
• Depending on the connected Bluetooth compatible
device(s), the function may differ. Also refer to the Owner's
Manual of the connected device(s).
Before Using Hands-Free Phone/
Audio Function
Before using the hands-free phone/audio function, the
following settings need to be made.
1
Be sure to set "INT MUTE" (in the setup
function of the connected head unit or Digital
Media receiver) to OFF.
• Before making sound interruption on the Bluetooth
compatible device, make sure that INT MUTE is set to
OFF. (Initial setting on the unit is OFF.)
2
Set "Bluetooth IN" or "Bluetooth" to
ADAPTER*. (Refer to the Owner's Manual of
the connected units.)
3
Turn the ignition key off (ACC OFF) and on
again (ACC ON).
• Before using a hands-free phone, it must be paired with the
adapter. Refer to "Bluetooth SETUP" (pages 4-5).
* If "Bluetooth IN" or "Bluetooth" is set to OFF once, the
communication to the adapter is canceled. To resume
communication: reset to ADAPTER, set the ignition key
from ACC to OFF once, and then to ON again.
* When a Bluetooth compatible device is not used, set
"Bluetooth IN" or "Bluetooth" to OFF, and remove the
adapter. If Bluetooth connection of the adapter is
maintained, connection (pairing) error to the adapter may
occur depending on the mobile phone, and result in
malfunction.
How to connect to a Bluetooth
compatible device (Pairing)
For details on the control from a Bluetooth compatible
device, refer to the Owner's Manual of the Bluetooth
compatible device.
1
Set a Bluetooth connection from a Bluetooth
compatible device.
2
The PIN code ("0000") is displayed on the
connected unit.
• The PIN code is fixed as "0000."
3
Input the PIN code ("0000") in a Bluetooth
compatible device.
4
If the connected unit is successfully
connected to a Bluetooth compatible device,
a paired device name and a registered
number (No. 1 to 4 or guest mode) are
displayed on the unit, and then the unit
returns to normal mode.
• Set "Setting the Search Mode" (page 5) to ON to enable
the KCE-350BT to recognize a mobile phone. For mobile
phone passkey (passcode) input operation, refer to the
mobile's Owner's Manual. Additionally, the mobile phone
can be searched directly from an AV head unit. Refer to
"Registering the Bluetooth Device (AV Head Unit only)"
(page 5).
3
-EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kce-300bt

Inhaltsverzeichnis