Configuration
(De)activating the switching via hotkeys
In the defaults, you can use hotkeys to switch between the computers.
If desired, you can deactivate this kind of switching in the setup menu.
How to enable/disable the switching via hotkeys:
NOTE:
Use the setup menu to (de)activate the switching via hotkeys.
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the Service socket.
2. Use the
Arrow
Select Channel via Hotkey
3. Press the
Space
disables the switching via hotkeys
Yes
No
enables the switching via hotkeys
4. Press the
S
23 · G&D DVIMUX2-DL-PS/2
keys to select the
or
Arrow
entry.
key (repeatedly) to choose one of the following options:
key to save your settings.