Switching Via Web Application; Switching Via Switching Tool; Switching Via Snmp - G&D DL-DVI-MUX2-NT Installation Und Bedienung

Advanced options to switch between channels
The KVM switch confirms the correct execution of the command with a message. A
message also informs you if the switching has failed.
Message
In [x] All
E01
E06
E10
E13

Switching via web application

Switching to one of the computers connected to the KVM switch can be carried out
via the web application Config Panel.
Detailed information on this topic are given in the separate manual for operating the
web application.

Switching via switching tool

Switching to one of the computers connected to the KVM switch can be carried out
via the switching tool EasyControl.
Detailed information on this topic are given in the separate manual for operating the
web application.

Switching via SNMP

How to switch the signal transmission via SNMP:
 Use the SNMP management station to set the managed object
number of the channel you want to access.
13 · G&D DL-DVI-MUX2-NT
Meaning
Successful switching to channel
Invalid channel number (out of range)
Switching between channels failed
Invalid command
Invalid value (out of range)
[x]
selectedChannel to the